Quick Start Guide: Monitors

Use the same email address and password you created when signing up for BACtrack View.

BACtrack has several apps, so make sure you download the correct app by using the button or QR code.

If you've forgotten your password, you can click the "Forgot your password?" link at the bottom of the sign-in page. You'll receive an email with a link to reset your password.

The first time you open the app, you'll be prompted to share access to your camera and location. This is required to use the app.

To set up a new testing schedule, tap the + icon on the right side of the screen. From here, you can select the Tester and then set:

Once you've set your testing schedule, tap the Schedule Test button to return to the home screen. From here, you can see all future tests scheduled — indicated by a gray dot under the date.

When it's time for the Tester to take a BAC test, they will receive a text message from BACtrack View. They should click the link in the message to open the BACtrack View app and begin their test:

Make sure Bluetooth is enabled on the Tester's smartphone, and then turn on the BACtrack by pressing the silver button for 1-2 seconds until the blue lights come on.

The app will then automatically connect with the BACtrack. Once connected, they will see a "preparing the device" screen, followed by "take a deep breath."

Once they are prompted, blow into the BACtrack for 6 seconds while holding their device at eye level. They do not need to blow as hard as they can, but they do need to exhale firmly and consistently for 6 seconds straight, until they hear a click in the device.

You will receive a notification, letting you know that a test has been completed. Click on any test result in the Calendar to see more details about that result, including the date, time, location (if enabled) and video.

NOTE: If they receive an "error" message, please turn the BACtrack off and on again before restarting the testing process.

On the Plus and Pro plans, you can download PDF reports of the Tester's activity and results. First, tap the Activity icon.

Then, tap the Download icon in the upper right-hand corner to receive an email with your PDF report attached.

Before you take your first breathalyzer test, please read the following:

• BACtrack View requires an active and stable internet connection in order for tests to be taken. Both WiFi and cellular data connections will work. Without a stable internet connection, readings may not save properly.
• Wait at least 15-20 minutes after eating, drinking or smoking before using the BACtrack Mobile breathalyzer. Failure to wait may cause inaccurate readings and damage the device's fuel cell sensor.
• During the testing process, remove anything that obscures your face (hat, sunglasses, etc.).
• While testing, you must hold your device at eye level and look directly into the camera.

Once you are prompted, blow into the BACtrack for 6 seconds while holding your device at eye level. You do not need to blow as hard as you can, but you do need to exhale firmly and consistently for 6 seconds straight, until you hear a click in the device.

While testing, you must hold your device at eye level and look directly into the camera. Use the front-facing camera and ensure you are in a well-lit area.

Because the BACtrack device is so sensitive, it can detect trace amounts of alcohol from substances in the surrounding area, which may trigger a positive test result.

• To avoid this problem, your BACtrack device should not be used near substances that contain methyl alcohol, isopropyl alcohol or acetone.
• In the event of a positive test result believed to be caused by a foreign substance, the trace amounts of alcohol detected from that substance should dissipate shortly after the initial test. The tester should wait 15-30 minutes and then re-test in an area clear of any foreign substances.

Also, avoid storing the BACtrack device near the above items at all times. Furthermore:

• Do not test in areas where large amounts of alcohol are being consumed, or in areas with strong winds, smoke, or chemical substances.
• Do not cover, hold, or obstruct the BACtrack device's mouthpiece during testing or permit any item to block the user's ability to breathe into the device.
• Do not use or store the BACtrack device in temperatures below 32°F or above 104°F.